Accessories

01. Process design should be appropriate 1 Must reserve 2 ~ 3 mm milling back amount. When making up the cover, as far as possible, when the day and the ground cover are double ...

Work flow and precautions of paperback binding linkage line 01. Gathering According to the binding order of the book, the folded book is placed in the corresponding storage stat...

As an essential wood connection method in modern woodworking, woodworking glue sounds not so "advanced" and "mysterious", but it is more convenient, grounded gas, and as long as...

In the process of emulsion polymerization, an important role of agitation is to disperse the monomer into droplets and to facilitate heat transfer. However, the stirring intensi...

In recent years, in the development and research of adhesives, the implementation of safety and pollution-free, especially solvation-free, has promoted the development of water-...

The application of edge sealing industry is very wide, and the products are widely used in furniture, office, kitchenware, teaching equipment, civil laboratories and so on. The ...

First, PVC wood grain sealing strip It is printed with ink on PVC substrate and then rolled with UV paint after curing. Wood grain sealing strip to present a good simulation eff...

The first kind: wood edge strip The wood edge sealing strip has the characteristics of natural, soft, no deformation and strong adhesion when pasting. Wood edge strips can be we...

The Difference Between Particle Board and Density Board Particleboard is made of wood after high temperature and high pressure processing. The middle layer of particleboard is w...

The edge film is not firmly attached 1. Film edge temperature is too low During the film coating process, the edge temperature of the film will drop relatively faster, and the a...

Both ends of the coater are mounted on the vertical support arm of the coater, which is driven by a belt, chain or cable to make the coater move down and coat along the surface ...

What is kraft paper? Kraft paper is paper produced using a specific type of pulping process, usually, in paper making, the wood is first "crushed", and then the cellulose pulp i...