With the popularity of aluminum honeycomb panel finished custom homes in the all-aluminum home furnishing industry, the demand for high-quality equipment in many all-aluminum home furnishing custom factories is also increasing. Among them, the edge banding machine, as a core component of the finished product customization production line, has become the mechanical equipment that many all-aluminum household finished product customization factories focus on. Aluminum honeycomb panel finished product customization quality is good, edge sealing effect is an important indicator to measure the effect.
So, how to clearly identify the quality of an aluminum honeycomb panel special edge banding machine at the beginning of the purchase of the machine?
1, listen to the manufacturer's product introduction, from the machine specifications, performance, scope of use, method of operation, price, service and other aspects, so as to have a general perceptual understanding of the required machine.
2, the selection of edge sealing machine mainly depends on the shape characteristics of the workpiece to be processed, the type of edge sealing material, but also consider productivity and quality and other issues.
3. Look at the sound condition outside the edge sealing machine. Check whether the parts and accessories are complete, see the operation demonstration of the manufacturer's demonstration personnel, see the bonding effect, and master the operation essentials of the machine.
4, when purchasing edge sealing machine, to consider the output of edge sealing products and some functions of the increase or decrease, such as PVC or ABS edge sealing materials need to add a scraper device; In order to ensure that the edge sealing quality is not affected by the low temperature in winter, the edge sealing machine equipped with preheating device should be selected; There are many other optional additional configurations, such as automatic tracking and trimming function, milling cutter device, etc.
5. Open the machine for trial operation. Check whether the power and air supply lines are smooth and sensitive, and whether the main shaft runs smoothly and noiseless. On this basis, the user decides whether to buy or not.
6, the problem of leakage is often plagued by the production of customized finished products, often difficult to clean, sol aging situation. Glue leakage: Due to transmission reasons, the sealing ring damage will cause glue leakage, affecting the normal operation of the machine. There is no leakage problem in the glue pan. Sol aging: The residual glue in the lower glue pot is affected by repeated heating and aging, and the sol in the upper glue pot oozes from top to bottom, without precipitation and residue. Easy to clean: the glue pot is more convenient than the glue pot, and even can be cleaned without stopping, without affecting production. Less failure: the upper transmission gear is convenient to refuel, reduce the failure, and bring a lot of convenience to the user.
7, the most important thing is the service speed and service quality of the edge banding machine manufacturer. A high-quality aluminum honeycomb panel special edge banding machine should have high stability, high yield, high quality, so as to efficiently produce high-quality aluminum honeycomb panel finished home.
