Before making wood panels, we need to understand one question: "Why board? "Usually, when a piece of wood is too narrow to make, we use two or more pieces of wood pieced together.
Perhaps some people will feel that only low-grade furniture will use the panel process, and it will become worthless after the wood panel. But this is not the case, even valuable mahogany furniture, is made of wood splicing. Patchwork is very common in mahogany furniture, but also more important.
The advantages of wood panels
1, because the core board is made of wood processing with small anisotropy, the surface of the plate is uneven, the degree of warping is small, and the surface of the upper and lower structure is covered with thin veneer, which can remove the phenomenon of uneven warping and cracking deformation of the surface of the plate, and increase the wood strength of the various development fields of China's plate enterprises.
2, the overall texture and color sense are very good, the texture is more prominent after painting.
3. After the solid wood panel is painted, the surface is free of glue cracks and uneven slats, and the physical properties are relatively stable during long-term use.
4, high utilization rate of wood resources, in line with the principle of system raw material utilization. Therefore, the solid wood decorative board is more suitable for the use and decorative function of furniture in terms of use and texture.
5, although the amount of glue on the solid wood splice board is greater than the solid wood wide splice board, but because of the double-sided thick veneer protection, and the four-sided thick veneer seal, the edge is actually only two sides of the glue seam, so the volatility of the adhesive in the solid wood splice board in the joint is far less than the volatility of the solid wood wide slice board and the solid wood integrated material, which is healthier.
At present, many solid wood furniture companies can use wood splicing process production and processing, in view of the traditional splicing of large resource loss, low efficiency, cumbersome methods and other shortcomings, high-frequency splicing equipment can solve some common problems in conventional splicing.
High-frequency splicing machine is stable and fast, even if the winter temperature is low, the efficiency of high-frequency splicing equipment in the winter period is greatly increased compared with conventional equipment, and the product quality after the splicing is guaranteed, and the impurities in the wood can be well removed through high temperature and high pressure.
As a one-stop solution to these problems, high-frequency splicing can solve some problems in the heating speed, heating efficiency and manual processing during the splicing process. Good quality, high-frequency equipment processing is stable, while you can find the material with high moisture in the splicing material, once to ensure product quality.
