Aug 03, 2023 Leave a message

Book Binding Glue On Coated Paper

Book Binding Glue on Coated Paper


In the process of bookbinding with coated paper, the surface of coated paper is treated with coating, which requires higher viscosity.
For the binding of coated board books and periodicals, the commonly used white latex binding is more difficult. The effect may be fine when it is just finished, but when the glue dries, the cohesion of white latex is not as strong as that of hot melt adhesive. In addition, white latex hardens in cold weather and easily loses its adhesive and falls off. However, using hot melt adhesive to glue books usually requires a glue machine. When binding books and electronics, the hot melt glue will be preheated and melted. When heated to a certain temperature, hot melt adhesive can achieve the best performance of gluing books. There is also a milling and backside roughing step in the connection process. This function allows the book binding glue to easily penetrate the spine of the book even when it encounters the page surface such as coated paper after grinding and rough treatment on the back. And when gluing, the glue liquid has a certain temperature and is also suitable for the penetration of the screen, which strengthens the durability of the hot melt adhesive layer on the screen. However, for books and courses with thick cover paper, direct binding is not recommended, and it is best to sew it first.


In addition, because coated paper books and courses are not conducive to bonding, the hot melt adhesive of coated paper used must be strong in weather resistance. For hot climates, the softening point of the hot melt adhesive should be high. A common problem in cold weather is that the adhesive layer hardens and loses cohesion. This requires the hot melt adhesive to have low temperature resistance.


The uneven surface of the plate is also a factor affecting the bonding effect of hot melt adhesive. The higher the roughness, the lower the requirements for hot melt adhesive bonding. According to the common writing paper, double adhesive paper and coated paper, the order of roughness from top to bottom is writing paper > double adhesive paper > coated paper, and the performance requirements of hot melt adhesive are the opposite.

 

SHANGHAI-ROCKY-ADHESIVES-CO-LTD-

Send Inquiry

whatsapp

Phone

E-mail

Inquiry